ADDER SmartView MultiScreen Guía de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 22
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
 


14

Configuration options
The Adder unit provides numerous configuration options to ensure that it best
suits your circumstances and the tasks carried out by the connected systems.
Setting (or changing) a password
The password option allows you to quickly impose a level of security suitable to
prevent system tampering while you are away from your desk for short periods.
When enabled, the Adder unit will default to protected mode when switched on
or when you press the hotkeys and L (lock).
To set (or change or cancel) a password
Note: If the SYSTEM readout shows p then the current password must be entered
before attempting to enter the configuration mode.
1 Enter configuration mode: Press and hold the SELECT button until the SYSTEM
readout shows C.
2 Press
. The SYSTEM readout will show = to indicate that you should
enter your new password.
Note: The password is not case sensitive and can be any combination of
keystrokes including the function keys but excluding , ,
and .
Note: To cancel the password protection function, do not enter any
characters, merely press .
3 When the password has been entered, press to fix it and press
to
exit from configuration mode.
To lock the system (invoking password protection)
Press and hold the hotkeys (usually and ) and press . The SYSTEM
readout should show p.
Note: If the SYSTEM readout shows , there is no password currently set.
To enter a password and unlock the system
1 Enter the current password (upper and lower cases are not differentiated).
2 Press . The SYSTEM readout should show the number of the first available
system.
If the password is forgotten
1 Remove power from the Adder unit. If any systems are active, either switch
them off or remove their keyboard link connectors from the Adder unit. If an
optional power supply is used, remove it.
2 Press and hold the SELECT button and re-apply at least one source of power.
The SYSTEM readout will show C to signify that configuration mode is active.
3 Follow the standard procedure ‘To set (or change or cancel) a password’
from step 2 to create a new password.
Changing hotkeys
Hotkeys are two normal keyboard keys that, when pressed simultaneously with
a third key, signal to the Adder unit that you are sending a message specifically
to it and not to the currently selected system. The hotkeys are ordinarily and
, while a third keypress determines what you want the Adder unit to do, e.g
change to different system, invoke password protection, etc.
If the standard and hotkeys are also needed for computer system tasks,
you can change them for another combination, as discussed below.
To change the hotkeys
1 Enter configuration mode: Press and hold the SELECT button until the SYSTEM
readout shows C.
2 Press followed by a number to select the required hotkey setting, as
follows:
‘CTRL’ and ‘ALT’ keys together (default)
‘CTRL’ and ‘SHIFT’ keys together
‘ALT’ and ‘SHIFT’ keys together
‘RIGHT ALT’ key
‘LEFT ALT’ and ‘RIGHT ALT’ keys together
‘LEFT CTRL’ and ‘LEFT ALT’ keys together
‘RIGHT CTRL’ and ‘RIGHT ALT’ keys together
No hotkey enabled
3 When the hotkey combination selection has been made, press to fix it
and press
to exit from configuration mode.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Elation Professional LED 36MH Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Zubehör für elektrische Elation Professional LED 36MH.
Wir stellen 1 PDF-Handbücher Elation Professional LED 36MH zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Zubehör für elektrische Elation Professional

Modelle Dokumententyp
Pro FS 1000 Bedienungsanleitung   Elation Professional Pro FS 1000 User Manual, 2 Seiten
Flower 5/90 Bedienungsanleitung   Elation Professional Flower 5/90 User Manual, 2 Seiten
DLED 36 Brick Bedienungsanleitung   Elation Professional DLED 36 Brick User Manual, 3 Seiten
ELAR EXFLOOD Flood Light Bedienungsanleitung   Elation Professional ELAR EXFLOOD Flood Light User Manual, 2 Seiten
Pro FS 575 Bedienungsanleitung   Elation Professional Pro FS 575 User Manual, 2 Seiten
High Output LED Color Changer Opti RGB WH Bedienungsanleitung   Elation Professional High Output LED Color Changer Opti RGB WH User Manual, 3 Seiten
Design LED 36 Pro Bedienungsanleitung   Elation Professional Design LED 36 Pro User Manual, 36 Seiten
CMY Zoom 250 Bedienungsanleitung   Elation Professional CMY Zoom 250 User Manual, 40 Seiten
ELED STRIP RGBW Bedienungsanleitung   Elation Professional ELED STRIP RGBW User Manual [en] , 10 Seiten
Aquarius II Bedienungsanleitung   Elation Professional Aquarius II User Manual, 4 Seiten
LED White Light Fresnel ELED Fresnel Bedienungsanleitung   Elation Professional LED White Light Fresnel ELED Fresnel User Manual, 2 Seiten
Design Par 575D Bedienungsanleitung   Elation Professional Design Par 575D User Manual, 3 Seiten
Power Spot 700 CMY II Bedienungsanleitung   Elation Professional Power Spot 700 CMY II User Manual, 3 Seiten
5R Bedienungsanleitung   Elation Professional 5R User Manual, 60 Seiten
Design Spot 1200c Bedienungsanleitung   Elation Professional Design Spot 1200c User Manual, 3 Seiten
Event Panel System Bedienungsanleitung   Elation Professional Event Panel System User Manual, 3 Seiten
Spot 1400E Bedienungsanleitung   Elation Professional Spot 1400E User Manual, 4 Seiten
Design Spot 250 Pro Bedienungsanleitung   Elation Professional Design Spot 250 Pro User Manual, 56 Seiten
Spot 300E Bedienungsanleitung   Elation Professional Spot 300E User Manual, 3 Seiten
60TM Bedienungsanleitung   Elation Professional 60TM User Manual, 48 Seiten