ADDER AdderLink X-DVI Guía de usuario descargar pdf (Pagina 7)

CONTENTSINTRODUCTIONINSTALLATIONOPERATION

FURTHER

INFORMATION

Connections at the local module

1 Where possible, ensure that power is removed from the computer system to be

connected.

2 Use the supplied dual link DVI-D cable to connect the DVI

input socket of the local module to the digital video

output socket of the computer.

3 Use the supplied USB cable to link the USB socket of the

local module to a vacant USB socket on the computer.

To video output port

To USB port

Note: Do not use USB cables longer

than 3 meters to connect the local

module to the computer.

4 Optionally use the supplied audio cable to link

the audio port to the stereo audio output of the

computer.

To audio port

CATx link cable

5 Connect the link cable (see page 2 for cable advice) to

the local module socket labeled TO REMOTE.

IMPORTANT:

• This is NOT an Ethernet port and must not be connected to network

switches or any device other than the X-DVIPRO-DL remote module.

• The X-DVIPRO-DL (dual link) extenders are NOT compatible with the

standard X-DVIPRO (single link) versions. Where both types are being

used in close proximity, take care not to cross connect the local and

remote modules between the two versions.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Sin comentarios

ADDER AdderLink X-DVI Guía de usuario Pagina 7